-------------------------------------------------------------------------- -----------------------SystemInfo----------------------------------------- --------------------------------------------------------------------------  _____ _ _____ _ / ____| | | | __ \| | | | __ ___ _ __ | |_ ___ ___ | |__) | | __ _ _ _ ___ _ __ | | |_ |/ _ \ '_ \| __/ _ \ / _ \| ___/| |/ _` | | | |/ _ \ '__| | |__| | __/ | | | || (_) | (_) | | | | (_| | |_| | __/ | \_____|\___|_| |_|\__\___/ \___/|_| |_|\__,_|\__, |\___|_| __/ | |___/ Profile: Profile not Setting RamSystem: Ramsystem not enabled Free memory: 1684MB of total 1907MB Kernel: 6.12.27-GentooPlayer-RT-ULTRA-EUP100-NOR-CLTO+ ─────────────────────────────────────── GentooPlayer | 17:05 | Sat 31/05/25 ─────────────────────────────────────── v9.00-304 | Raspberry Pi 4B+ (aarch64) ─────────────────────────────────────── eth0 | 192.168.1.204 ─────────────────────────────────────── Players/soft. Info: Squeezelite-R2 [Disabled] Squeezelite [Disabled] Networkaudiod [Disabled] LyrionMusicServer [Disabled] BubbleUpnp [Disabled] HQPlayer Embedded [Disabled] Mpd [Disabled] UpMpdCli [Disabled] RoonBridge [Enabled] RoonServer [Disabled] myMPD [Disabled] minimserver [Disabled] shairport-sync [Disabled] spotify-connect [Disabled] web-interface [Enabled] Samba [Disabled] gmediarender [Disabled] camillagui [Disabled] aplayer [Disabled] aprenderer [Disabled] Audirvana Origin [Disabled] Audirvana Studio [Disabled] HotSpot [Disabled] GP-Service Info: gpchronystop [Enabled] gpgovernor [Enabled] gphavagedstop [Enabled] gprtclock [Enabled] gpsetrestart [Enabled] gp_starter [Enabled] - Started Service: dhcpcd roonbridge gpgovernor netmount sshd local Stopped Service: chronyd clockup gprtclock gp_starter gpchronystop gphavagedstop gpsetrestart Crashed Service: ───────────────────────────────────────────────────── Boot Options: dwc_otg.lpm_enable=0 console=tty1 root=PARTUUID=5e006b24-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait selinux=0 net.ifnames=0 ───────────────────────────────────────────────────── *** Scanning for playback devices *** Card 0, ID `DAC', name `I-Sabre Q2M DAC' Device 0, ID `I-Sabre Q2M DAC i-sabre-codec-dai-0', name `I-Sabre Q2M DAC i-sabre-codec-dai-0', 1 subdevices (0 available) ───────────────────────────────────────────────────── AUDIO CARDS INFO: CARD TYPE ADDRESS NAME -------------------------------------------------------------------------------------------------------- card0 Internal Audio card card0 --> -- I-Sabre Q2M DAC card0 STATUS --> access: RW_INTERLEAVED format: S32_LE subformat: STD channels: 2 rate: 44100 (44100/1) period_size: 882 buffer_size: 1764 -------------------------------------------------------------------------------------------------------- 1694-------------------------------------------------------------------------------------------------------- ───────────────────────────────────────────────────── K-e4:5f:01:d2:2b:bd ───────────────────────────────────────────────────── ───────────────────────────────────────────────────── Filesystem Type Size Used Avail Use% Mounted on /dev/root ext4 28G 4.5G 22G 17% / devtmpfs devtmpfs 10M 0 10M 0% /dev tmpfs tmpfs 382M 524K 381M 1% /run shm tmpfs 954M 12K 954M 1% /dev/shm /dev/mmcblk0p1 vfat 591M 296M 296M 50% /boot ───────────────────────────────────────────────────── Raspberry Pi 4 Model B Rev 1.5 CPU(s): 4 On-line CPU(s) list: 0-3 CPU(s) scaling MHz: 40% Thread(s) per core: 1 Vendor ID: ARM Model: 3 Model name: Cortex-A72 ───────────────────────────────────────────────────── CPU-specific microarchitecture: ───────────────────────────────────────────────────── Gentooplayer CPU Info Use cpu-governor to change CPU / performance options ───────────────────────────────────────────────────── Architecture | aarch64 Temp | 42'c : 107'f | Cool runnings. Governor | powersave Current Freq Min Freq Max Freq CPU0 | 600 MHz 600 MHz 1500 MHz CPU1 | 600 MHz 600 MHz 1500 MHz CPU2 | 600 MHz 600 MHz 1500 MHz CPU3 | 600 MHz 600 MHz 1500 MHz ───────────────────────────────────────────────────── COMMAND %CPU python 7.8 mono-sgen 3.2 nmap 2.9 mono-sgen 2.9 -------------------------------------------------------------------------- -----------------------ifconfig------------------------------------------- -------------------------------------------------------------------------- eth0: flags=4163 mtu 1500 inet 192.168.1.204 netmask 255.255.255.0 broadcast 192.168.1.255 inet6 fd4b:125c:6edc:914b:11f8:33a8:b753:df61 prefixlen 64 scopeid 0x0 inet6 fe80::83c4:87b0:69cc:f3b9 prefixlen 64 scopeid 0x20 ether e4:5f:01:d2:2b:bd txqueuelen 1000 (Ethernet) RX packets 160309 bytes 217713214 (207.6 MiB) RX errors 0 dropped 1 overruns 0 frame 0 TX packets 47255 bytes 3084685 (2.9 MiB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 lo: flags=73 mtu 65536 inet 127.0.0.1 netmask 255.0.0.0 inet6 ::1 prefixlen 128 scopeid 0x10 loop txqueuelen 1000 (Local Loopback) RX packets 339 bytes 109530 (106.9 KiB) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 339 bytes 109530 (106.9 KiB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 -------------------------------------------------------------------------- -----------------------check mute----------------------------------------- -------------------------------------------------------------------------- numid=4,iface=MIXER,name='I2S/SPDIF Select' ; type=ENUMERATED,access=rw------,values=1,items=2 ; Item #0 'I2S' ; Item #1 'SPDIF' : values=0 numid=2,iface=MIXER,name='Digital Playback Switch' ; type=BOOLEAN,access=rw------,values=1 : values=off numid=1,iface=MIXER,name='Digital Playback Volume' ; type=INTEGER,access=rw---R--,values=1,min=0,max=100,step=0 : values=100 | dBscale-min=-100.00dB,step=1.00dB,mute=0 numid=3,iface=MIXER,name='FIR Filter Type' ; type=ENUMERATED,access=rw------,values=1,items=7 ; Item #0 'brick wall' ; Item #1 'corrected minimum phase fast' ; Item #2 'minimum phase slow' ; Item #3 'minimum phase fast' ; Item #4 'linear phase slow' ; Item #5 'linear phase fast' ; Item #6 'apodizing fast' : values=7 -------------------------------------------------------------------------- -----------------------AUDIO-CARD----------------------------------------- -------------------------------------------------------------------------- null Discard all samples (playback) or generate zero samples (capture) default:CARD=DAC I-Sabre Q2M DAC, I-Sabre Q2M DAC i-sabre-codec-dai-0 Default Audio Device sysdefault:CARD=DAC I-Sabre Q2M DAC, I-Sabre Q2M DAC i-sabre-codec-dai-0 Default Audio Device -------------------------------------------------------------------------- -----------------------RC-STATUS------------------------------------------ -------------------------------------------------------------------------- Runlevel: default dhcpcd [ started ] roonbridge [ started ] chronyd [ stopped ] clockup [ stopped ] gpgovernor [ started ] gprtclock [ stopped ] gp_starter [ stopped ] netmount [ started ] sshd [ started ] gpchronystop [ stopped ] sysftw [ stopped ] local [ started ] gphavagedstop [ stopped ] gpsetrestart [ stopped ] Dynamic Runlevel: hotplugged Dynamic Runlevel: needed/wanted Dynamic Runlevel: manual -------------------------------------------------------------------------- -----------------------RC-Update------------------------------------------ -------------------------------------------------------------------------- LICENSE | agetty | alsasound | boot autoexpand-root | avahi-daemon | avahi-dnsconfd | binfmt | boot bootlogd | bootmisc | boot bubbleupnp | cgroups | sysinit chronyd | default clockup | default consolefont | cronie | dbus | devfs | sysinit device-mapper | dhcpcd | default dmesg | sysinit dnsmasq | fsck | boot fuse | git-daemon | gmediarender | gp_starter | default gpchronystop | default gpgovernor | default gphavagedstop | default gpireteonline | gpkernel1 | gpkernel2 | gpkernel3 | gpkernel4 | gplibudevstop | gpmac | gprtclock | default gpsetall | gpsetaplayer | gpsetaprenderer | gpsetbub | gpsetdirettah | gpsetdirettat | gpseteth | gpsetgmedia | gpsetgstp | gpsethq4 | gpsethqp | gpsetirq | gpsetlib | gpsetlms | gpsetmin | gpsetmpd | gpsetmym | gpsetnad | gpsetprofile1 | gpsetprofile2 | gpsetprofile3 | gpsetprofile4 | gpsetprofile6 | gpsetprofile7 | gpsetrestart | default gpsetrestart0 | gpsetrob | gpsetros | gpsetsha | gpsetsq2 | gpsetsqn | gpsetupm | gpsetusb | gpsetweb | gpsqstart | gstreciver | haveged | boot hostapd | hostname | boot hwclock | ip6tables | iptables | keymaps | boot killprocs | shutdown kmod-static-nodes | sysinit librespot | local | default nonetwork localmount | boot loopback | boot lyrionmusicserver | metalog | minimserver | modules | boot mount-ro | shutdown mpd | mpd-sima | mtab | boot mympd | net-online | net.lo | net.wlan0 | netmount | default networkaudiod | nfs | nfsclient | ntp-client | ntp-client.dist_0000 | ntpd | numlock | osclock | pciparm | procfs | boot pydoc-3.13 | ramdisk | ramdiskmusic | roonbridge | default root | boot rpc.idmapd | rpc.pipefs | rpc.statd | rpcbind | rpi4-eeprom-updater | rsyncd | runsvdir | s6-svscan | samba | save-keymaps | boot save-termencoding | boot savecache | shutdown seedrng | boot shairport-sync | sntp | squeezelite | squeezelite-R2 | sshd | default swap | swclock | boot sysctl | boot sysfs | sysinit sysftw | default systemd-tmpfiles-setup | boot systemd-tmpfiles-setup-dev | sysinit termencoding | boot twistd | udev | sysinit udev-settle | udev-trigger | sysinit upmpdcli | user | web | default wpa_supplicant | -------------------------------------------------------------------------- -----------------------squeezelite-R2------------------------------------- -------------------------------------------------------------------------- # Copyright 1999-2016 Gentoo Foundation # Distributed under the terms of the GNU General Public License v2 # /etc/conf.d/squeezelite-R2: configuration for /etc/init.d/squeezelite-R2 # Switches to pass to Squeezelite-R2. See 'squeezelite-R2 -h' for # a description of the possible switches. # # Example setting the server IP, the ALSA output device, the player name # and visualiser support: # SL_OPTS="-s 192.168.1.56 -o sysdefault -n GentooPlayer -v" # # Example seleting pulse output: # export PULSE_SERVER=localhost # SL_OPTS="-s 192.168.1.56 -o pulse -n GentooPlayer -v" #for more information on the various configuration options visit http://marcoc1712.it/?page_id=139 # #SL_OPTS="-C 1 -D :u32be -o hw:CARD=X20,DEV=0 -r 44100-384000 -b 262144:262144 -a 499:3::0 -n GentooPlayer" #SL_OPTS="-C 1 -D :u32be -o hw:CARD=X20,DEV=0 -r 44100-384000 -a 80:3::0 -n GentooPlayer" SL_OPTS="" -------------------------------------------------------------------------- -----------------------squeezelite---------------------------------------- -------------------------------------------------------------------------- # Copyright 1999-2017 Gentoo Foundation # Distributed under the terms of the GNU General Public License v2 # /etc/conf.d/squeezeslave: configuration for /etc/init.d/squeezelite # Switches to pass to Squeezelite. See 'squeezelite -h' for # a description of the possible switches. # # Example setting the server IP, the ALSA output device, the player name # and visualiser support: # SL_OPTS="-s 192.168.1.56 -o sysdefault -n $HOSTNAME" #SL_OPTS="-C 1 -W -D :u32be -o hw:CARD=X20,DEV=0 -r 44100-384000 -a 80:3::0 -n GentooPlayer" SL_OPTS="" -------------------------------------------------------------------------- -----------------------mpd------------------------------------------------ -------------------------------------------------------------------------- # An example configuration file for MPD. # Read the user manual for documentation: http://www.musicpd.org/doc/user/ # Files and directories ####################################################### # # This setting controls the top directory which MPD will search to discover the # available audio files and add them to the daemon's online database. This # setting defaults to the XDG directory, otherwise the music directory will be # be disabled and audio files will only be accepted over ipc socket (using # file:// protocol) or streaming files over an accepted protocol. # #music_directory "$XDG_MUSIC_DIR" #music_directory "~/music" # # This setting sets the MPD internal playlist directory. The purpose of this # directory is storage for playlists created by MPD. The server will use # playlist files not created by the server but only if they are in the MPD # format. This setting defaults to playlist saving being disabled. # #playlist_directory "$XDG_CONFIG_HOME/mpd/playlists" #playlist_directory "~/.mpd/playlists" # # This setting sets the location of the MPD database. This file is used to # load the database at server start up and store the database while the # server is not up. This setting defaults to disabled which will allow # MPD to accept files over ipc socket (using file:// protocol) or streaming # files over an accepted protocol. # #db_file "$XDG_CACHE_HOME/mpd/database" #db_file "~/.mpd/database" # These settings are the locations for the daemon log files for the daemon. # # The special value "syslog" makes MPD use the local syslog daemon. This # setting defaults to logging to syslog. # # If you use systemd, do not configure a log_file. With systemd, MPD # defaults to the systemd journal, which is fine. # log_file "/var/log/mpd/mpd.log" #log_file "$XDG_CACHE_HOME/mpd/log" #log_file "~/.mpd/log" # This setting sets the location of the file which stores the process ID # for use of mpd --kill and some init scripts. This setting is disabled by # default and the pid file will not be stored. # # If you use systemd, do not configure a pid_file. # pid_file "/run/mpd/mpd.pid" #pid_file "$XDG_RUNTIME_DIR/mpd/mpd.pid" #pid_file "~/.mpd/pid" # This setting sets the location of the file which contains information about # most variables to get MPD back into the same general shape it was in before # it was brought down. This setting is disabled by default and the server # state will be reset on server start up. # #state_file "$XDG_RUNTIME_DIR/mpd/state" #state_file "~/.mpd/state" # # The location of the sticker database. This is a database which # manages dynamic information attached to songs. # #sticker_file "$XDG_CACHE_HOME/sticker.sql" #sticker_file "~/.mpd/sticker.sql" # ############################################################################### # General music daemon options ################################################ # # This setting specifies the user that MPD will run as. MPD should never run as # root and you may use this setting to make MPD change its user ID after # initialization. This setting is disabled by default and MPD is run as the # current user. # user "mpd" # # This setting specifies the group that MPD will run as. If not specified # primary group of user specified with "user" setting will be used (if set). # This is useful if MPD needs to be a member of group such as "audio" to # have permission to use sound card. # group "audio" # # This setting sets the address for the daemon to listen on. Careful attention # should be paid if this is assigned to anything other than the default, any. # This setting can deny access to control of the daemon. Not effective if # systemd socket activation is in use. # # For network #bind_to_address "any" # # And for Unix Socket #bind_to_address "$XDG_RUNTIME_DIR/mpd/socket" #bind_to_address "~/.mpd/socket" # # This setting is the TCP port that is desired for the daemon to get assigned # to. # #port "6600" # # Suppress all messages below the given threshold. Use "verbose" for # troubleshooting. Available setting arguments are "notice", "info", "verbose", # "warning" and "error". # #log_level "notice" # # Setting "restore_paused" to "yes" puts MPD into pause mode instead # of starting playback after startup. # #restore_paused "no" # # This setting enables MPD to create playlists in a format usable by other # music players. # #save_absolute_paths_in_playlists "no" # # This setting defines a list of tag types that will be extracted during the # audio file discovery process. The complete list of possible values can be # found in the user manual. #metadata_to_use "artist,album,title,track,name,genre,date,composer,performer,disc" # # This example just enables the "comment" tag without disabling all # the other supported tags: #metadata_to_use "+comment" # # This setting enables automatic update of MPD's database when files in # music_directory are changed. # #auto_update "yes" # # Limit the depth of the directories being watched, 0 means only watch # the music directory itself. There is no limit by default. # #auto_update_depth "3" # ############################################################################### # Symbolic link behavior ###################################################### # # If this setting is set to "yes", MPD will discover audio files by following # symbolic links outside of the configured music_directory. # #follow_outside_symlinks "yes" # # If this setting is set to "yes", MPD will discover audio files by following # symbolic links inside of the configured music_directory. # #follow_inside_symlinks "yes" # ############################################################################### # Zeroconf / Avahi Service Discovery ########################################## # # If this setting is set to "yes", service information will be published with # Zeroconf / Avahi. # #zeroconf_enabled "yes" # # The argument to this setting will be the Zeroconf / Avahi unique name for # this MPD server on the network. %h will be replaced with the hostname. # #zeroconf_name "Music Player @ %h" # ############################################################################### # Permissions ################################################################# # # If this setting is set, MPD will require password authorization. The password # setting can be specified multiple times for different password profiles. # #password "password@read,add,control,admin" # # This setting specifies the permissions a user has who has not yet logged in. # #default_permissions "read,add,control,admin" # ############################################################################### # Database ####################################################################### # # An example of a database section instead of the old 'db_file' setting. # It enables mounting other storages into the music directory. # #database { # plugin "simple" # path "~/.local/share/mpd/db" # cache_directory "~/.local/share/mpd/cache" #} # # An example of database config for a satellite setup # #music_directory "nfs://fileserver.local/srv/mp3" #database { # plugin "proxy" # host "other.mpd.host" # port "6600" #} # Input ####################################################################### # input { plugin "curl" # proxy "proxy.isp.com:8080" # proxy_user "user" # proxy_password "password" } # ############################################################################### # Audio Output ################################################################ # # MPD supports various audio output types, as well as playing through multiple # audio outputs at the same time, through multiple audio_output settings # blocks. Setting this block is optional, though the server will only attempt # autodetection for one sound card. # # An example of an ALSA output: # #audio_output { # type "alsa" # name "My ALSA Device" ## device "hw:0,0" # optional ## mixer_type "hardware" # optional ## mixer_device "default" # optional ## mixer_control "PCM" # optional ## mixer_index "0" # optional #} # # An example of an OSS output: # #audio_output { # type "oss" # name "My OSS Device" ## device "/dev/dsp" # optional ## mixer_type "hardware" # optional ## mixer_device "/dev/mixer" # optional ## mixer_control "PCM" # optional #} # # An example of a shout output (for streaming to Icecast): # #audio_output { # type "shout" # encoder "vorbis" # optional # name "My Shout Stream" # host "localhost" # port "8000" # mount "/mpd.ogg" # password "hackme" # quality "5.0" # bitrate "128" # format "44100:16:1" ## protocol "icecast2" # optional ## user "source" # optional ## description "My Stream Description" # optional ## url "http://example.com" # optional ## genre "jazz" # optional ## public "no" # optional ## timeout "2" # optional ## mixer_type "software" # optional #} # # An example of a recorder output: # #audio_output { # type "recorder" # name "My recorder" # encoder "vorbis" # optional, vorbis or lame # path "/var/lib/mpd/recorder/mpd.ogg" ## quality "5.0" # do not define if bitrate is defined # bitrate "128" # do not define if quality is defined # format "44100:16:1" #} # # An example of a httpd output (built-in HTTP streaming server): # #audio_output { # type "httpd" # name "My HTTP Stream" # encoder "vorbis" # optional, vorbis or lame # port "8000" # bind_to_address "0.0.0.0" # optional, IPv4 or IPv6 ## quality "5.0" # do not define if bitrate is defined # bitrate "128" # do not define if quality is defined # format "44100:16:1" # max_clients "0" # optional 0=no limit #} # # An example of a pulseaudio output (streaming to a remote pulseaudio server) # #audio_output { # type "pulse" # name "My Pulse Output" ## server "remote_server" # optional ## sink "remote_server_sink" # optional ## media_role "media_role" #optional #} # # An example of a winmm output (Windows multimedia API). # #audio_output { # type "winmm" # name "My WinMM output" ## device "Digital Audio (S/PDIF) (High Definition Audio Device)" # optional # or ## device "0" # optional ## mixer_type "hardware" # optional #} # # An example of a wasapi output (Windows multimedia API). # #audio_output { # type "wasapi" # name "My WASAPI output" ## device "Digital Audio (S/PDIF) (High Definition Audio Device)" # optional # or ## device "0" # optional ## mixer_type "hardware" # optional ## Exclusive mode blocks all other audio source, and get best audio quality without resampling. ## exclusive "no" # optional ## Enumerate all devices in log. ## enumerate "no" # optional #} # # An example of an openal output. # #audio_output { # type "openal" # name "My OpenAL output" ## device "Digital Audio (S/PDIF) (High Definition Audio Device)" # optional #} # # An example of an sndio output. # #audio_output { # type "sndio" # name "sndio output" # mixer_type "hardware" #} # # An example of an OS X output: # #audio_output { # type "osx" # name "My OS X Device" ## device "Built-in Output" # optional ## channel_map "-1,-1,0,1" # optional #} # ## Example "pipe" output: # #audio_output { # type "pipe" # name "my pipe" # command "aplay -f cd 2>/dev/null" ## Or if you're want to use AudioCompress # command "AudioCompress -m | aplay -f cd 2>/dev/null" ## Or to send raw PCM stream through PCM: # command "nc example.org 8765" # format "44100:16:2" #} # ## An example of a null output (for no audio output): # #audio_output { # type "null" # name "My Null Output" # mixer_type "none" # optional #} # ############################################################################### # Normalization automatic volume adjustments ################################## # # This setting specifies the type of ReplayGain to use. This setting can have # the argument "off", "album", "track" or "auto". "auto" is a special mode that # chooses between "track" and "album" depending on the current state of # random playback. If random playback is enabled then "track" mode is used. # See for # more details about ReplayGain. # This setting is off by default. # #replaygain "album" # ############################################################################### # Character Encoding ########################################################## # # If file or directory names do not display correctly for your locale then you # may need to modify this setting. # #filesystem_charset "UTF-8" # ############################################################################### -------------------------------------------------------------------------- -----------------------upmpdcli------------------------------------------- -------------------------------------------------------------------------- friendlyname=GentooPlayer-UPNP openhome=0 ohmodelname=GentooPlayerModel ohmanufacturername=GentooPlayer ohproducturl=http://www.gentooplayer.com/ iconpath=/usr/share/gentooplayer/gp_ico.png radiolist=/usr/share/upmpdcli/radio_scripts/radiolist.conf checkcontentformat=0 #####MEDIASERVER############ uprclautostart=0 upradiosuser=0 tidaluser=0 subsonicuser=0 radio-browseruser=0 radio-paradiseuser=0 qobuzuser=0 mother-earth-radiouser=0 hrauser=0 bbcautostart=0 ######ENDE################## -------------------------------------------------------------------------- -----------------------minimserver---------------------------------------- -------------------------------------------------------------------------- -------------------------------------------------------------------------- -----------------------shairport-sync------------------------------------- -------------------------------------------------------------------------- general = { port = 5005; } -------------------------------------------------------------------------- -----------------------librespot------------------------------------------ -------------------------------------------------------------------------- LS_OPTS="-n "GentooPlayer" -b 320 --initial-volume=100" -------------------------------------------------------------------------- -----------------------lsmod------------------------------------------ -------------------------------------------------------------------------- Module Size Used by snd_soc_i_sabre_codec 12288 1 snd_soc_bcm2835_i2s 16384 2 raspberrypi_hwmon 12288 0 i2c_bcm2835 12288 0 snd_soc_i_sabre_q2m 12288 1 nvmem_rmem 12288 0 -------------------------------------------------------------------------- -----------------------lspci------------------------------------------ -------------------------------------------------------------------------- 00:00.0 PCI bridge: Broadcom Inc. and subsidiaries BCM2711 PCIe Bridge (rev 20) (prog-if 00 [Normal decode]) Device tree node: /sys/firmware/devicetree/base/scb/pcie@7d500000/pci@0,0 Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 Memory behind bridge: 00000000-000fffff [size=1M] [32-bit] Prefetchable memory behind bridge: [disabled] [64-bit] Capabilities: [48] Power Management version 3 Capabilities: [ac] Express Root Port (Slot-), IntMsgNum 0 Capabilities: [100] Advanced Error Reporting Capabilities: [180] Vendor Specific Information: ID=0000 Rev=0 Len=028 Capabilities: [240] L1 PM Substates 01:00.0 USB controller: VIA Technologies, Inc. VL805/806 xHCI USB 3.0 Controller (rev 01) (prog-if 30 [XHCI]) Subsystem: VIA Technologies, Inc. VL805/806 xHCI USB 3.0 Controller Device tree node: /sys/firmware/devicetree/base/scb/pcie@7d500000/pci@0,0/usb@0,0 Flags: bus master, fast devsel, latency 0, IRQ 29 Memory at 600000000 (64-bit, non-prefetchable) [size=4K] Capabilities: [80] Power Management version 3 Capabilities: [90] MSI: Enable+ Count=4/4 Maskable- 64bit+ Capabilities: [c4] Express Endpoint, IntMsgNum 0 Capabilities: [100] Advanced Error Reporting Kernel driver in use: xhci_hcd -------------------------------------------------------------------------- -----------------------debug---------------------------------------------- -------------------------------------------------------------------------- total 108 drwxr-xr-x 2 root root 4096 May 14 19:34 bin drwxr-xr-x 4 root root 20480 Jan 1 1970 boot drwxr-xr-x 10 root root 3080 May 31 16:58 dev drwxr-xr-x 61 root root 4096 May 31 16:58 etc drwxr-xr-x 2 root root 4096 Feb 9 2020 home drwxr-xr-x 10 root root 4096 May 8 16:27 lib drwxr-xr-x 6 root root 4096 May 8 13:18 lib64 drwx------ 2 root root 16384 May 9 09:55 lost+found drwxr-xr-x 2 root audio 4096 Apr 14 2019 media drwxr-xr-x 3 root root 4096 May 8 18:23 mkstage4 drwxr-xr-x 3 root root 4096 Feb 9 2020 mnt drwxr-xr-x 2 root root 4096 May 18 2024 mountpoints drwxr-xr-x 2 root root 4096 May 31 16:58 newuser drwxr-xr-x 2 root root 4096 May 31 16:58 newuser1 drwxr-xr-x 2 root root 4096 May 15 17:41 newuser2 drwxr-xr-x 8 root root 4096 May 31 17:02 opt dr-xr-xr-x 172 root root 0 Jan 1 1970 proc drwx------ 8 root root 4096 May 31 16:59 root drwxr-xr-x 13 root root 400 May 31 17:03 run drwxr-xr-x 2 root root 4096 May 31 17:03 sbin dr-xr-xr-x 12 root root 0 May 31 17:03 sys drwxrwxrwt 8 root root 4096 May 31 17:05 tmp drwxr-xr-x 11 root root 4096 Mar 20 2022 usr drwxr-xr-x 9 root root 4096 Jan 10 05:22 var total 72 drwxr-xr-x 2 root root 4096 May 30 20:28 alsa drwxr-xr-x 2 root root 4096 May 31 17:00 chrony drwxr-xr-x 2 root root 4096 Mar 15 2023 ctdb drwxr-xr-x 2 root root 4096 May 8 14:35 dbus drwxr-xr-x 2 root root 4096 Jun 15 2024 dhcpcd drwxr-xr-x 3 root root 4096 Apr 14 2019 gentoo drwxr-xr-x 2 root root 4096 Mar 15 2023 ip6tables drwxr-xr-x 2 root root 4096 Mar 15 2023 iptables drwxr-xr-x 3 root root 4096 Jan 10 04:00 logitechmediaserver drwxr-xr-x 5 root root 4096 Jan 10 04:02 lyrionmusicserver drwxr-xr-x 2 root root 4096 Mar 16 2023 misc drwxr-xr-x 4 mpd audio 4096 May 18 2024 mpd drwxr-xr-x 5 root root 4096 Jun 4 2023 nfs drwxr-xr-x 2 ntp ntp 4096 Mar 3 2024 ntp drwxr-sr-x 3 root portage 4096 May 14 19:35 portage drwxr-xr-x 3 root root 4096 Feb 22 2020 raspberrypi drwxr-xr-x 4 root root 4096 Mar 15 2023 samba drwx------ 2 root root 4096 May 31 16:58 seedrng total 20 drwxr-xr-x 2 root root 4096 Jan 10 04:20 bubbleupnp drwxr-xr-x 11 root root 4096 May 8 15:50 lyrionmusicserver lrwxrwxrwx 1 root root 21 May 8 15:37 openjdk-bin-21 -> openjdk-bin-21.0.7_p6 drwxr-xr-x 9 root root 4096 May 8 15:40 openjdk-bin-21.0.7_p6 drwxr-xr-x 4 root root 4096 Dec 8 2022 RoonBridge drwxr-xr-x 8 root root 4096 May 8 12:05 rust-bin-1.86.0