ata1: SATA max UDMA/133 abar m2048@0xc0617000 port 0xc0617100 irq 24 ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) ata1.00: ATA-8: PLEXTOR PX-128M5Pro, 1.06, max UDMA/133 ata1.00: 250069680 sectors, multi 1: LBA48 NCQ (depth 32), AA ata1.00: ATA Identify Device Log not supported ata1.00: ATA Identify Device Log not supported ata1.00: configured for UDMA/133 -------------------------------- [Sat Nov 15 11:45:55 2025] ata1.00: exception Emask 0x50 SAct 0xa00000 SErr 0x40c0800 action 0xe frozen [Sat Nov 15 11:45:55 2025] ata1.00: irq_stat 0x00000040, connection status changed [Sat Nov 15 11:45:55 2025] ata1: SError: { HostInt CommWake 10B8B DevExch } [Sat Nov 15 11:45:55 2025] ata1.00: failed command: WRITE FPDMA QUEUED [Sat Nov 15 11:45:55 2025] ata1.00: cmd 61/18:a8:a0:f8:a8/00:00:08:00:00/40 tag 21 ncq dma 12288 out res 40/00:bc:b8:f8:a8/00:00:08:00:00/40 Emask 0x50 (ATA bus error) [Sat Nov 15 11:45:55 2025] ata1.00: status: { DRDY } [Sat Nov 15 11:45:55 2025] ata1.00: failed command: WRITE FPDMA QUEUED [Sat Nov 15 11:45:55 2025] ata1.00: cmd 61/08:b8:b8:f8:a8/00:00:08:00:00/40 tag 23 ncq dma 4096 out res 40/00:bc:b8:f8:a8/00:00:08:00:00/40 Emask 0x50 (ATA bus error) [Sat Nov 15 11:45:55 2025] ata1.00: status: { DRDY } [Sat Nov 15 11:45:55 2025] ata1: hard resetting link [Sat Nov 15 11:45:56 2025] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [Sat Nov 15 11:45:56 2025] ata1.00: ATA Identify Device Log not supported [Sat Nov 15 11:45:56 2025] ata1.00: ATA Identify Device Log not supported [Sat Nov 15 11:45:56 2025] ata1.00: configured for UDMA/133 [Sat Nov 15 11:45:56 2025] ata1: EH complete -------------------------------------------- # smartctl -HA /dev/sda smartctl 7.2 2020-12-30 r5155 [x86_64-linux-5.15.193] (local build) Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED SMART Attributes Data Structure revision number: 1 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x0003 100 100 070 Pre-fail Always - 0 5 Reallocated_Sector_Ct 0x0003 100 100 000 Pre-fail Always - 0 9 Power_On_Hours 0x0002 100 100 000 Old_age Always - 14933 12 Power_Cycle_Count 0x0002 100 100 000 Old_age Always - 4218 177 Wear_Leveling_Count 0x0003 100 100 000 Pre-fail Always - 1236219 178 Used_Rsvd_Blk_Cnt_Chip 0x0003 100 100 000 Pre-fail Always - 0 181 Program_Fail_Cnt_Total 0x0003 100 100 000 Pre-fail Always - 0 182 Erase_Fail_Count_Total 0x0003 100 100 000 Pre-fail Always - 0 187 Reported_Uncorrect 0x0002 100 100 000 Old_age Always - 0 192 Power-Off_Retract_Count 0x0003 100 100 000 Pre-fail Always - 531 196 Reallocated_Event_Count 0x0003 100 100 000 Pre-fail Always - 0 198 Offline_Uncorrectable 0x0003 100 100 000 Pre-fail Always - 0 199 UDMA_CRC_Error_Count 0x0003 100 100 000 Pre-fail Always - 1 232 Available_Reservd_Space 0x0003 100 100 010 Pre-fail Always - 0 241 Host_Writes_32MiB 0x0003 100 100 000 Pre-fail Always - 1446286 242 Host_Reads_32MiB 0x0003 100 100 000 Pre-fail Always - 1686088