| smartctl 7.5 2025-04-30 r5714 [x86_64-linux-6.15.6-arch1-1] (local build)
|
| Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org
|
|
|
| === START OF INFORMATION SECTION ===
|
| Model Family: Toshiba 3.5" DT01ACA... Desktop HDD
|
| Device Model: TOSHIBA DT01ACA100
|
| Serial Number: Y6BKLE1NS
|
| LU WWN Device Id: 5 000039 febf245f8
|
| Firmware Version: MS2OA7L0
|
| User Capacity: 1,000,204,886,016 bytes [1.00 TB]
|
| Sector Sizes: 512 bytes logical, 4096 bytes physical
|
| Rotation Rate: 7200 rpm
|
| Form Factor: 3.5 inches
|
| Device is: In smartctl database 7.5/5706
|
| ATA Version is: ATA8-ACS T13/1699-D revision 4
|
| SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
|
| Local Time is: Mon Jul 21 01:06:02 2025 EEST
|
| SMART support is: Available - device has SMART capability.
|
| SMART support is: Enabled
|
|
|
| === START OF READ SMART DATA SECTION ===
|
| SMART overall-health self-assessment test result: PASSED
|
|
|
| General SMART Values:
|
| Offline data collection status: (0x84) Offline data collection activity
|
| was suspended by an interrupting command from host.
|
| Auto Offline Data Collection: Enabled.
|
| Self-test execution status: ( 0) The previous self-test routine completed
|
| without error or no self-test has ever
|
| been run.
|
| Total time to complete Offline
|
| data collection: ( 7022) seconds.
|
| Offline data collection
|
| capabilities: (0x5b) SMART execute Offline immediate.
|
| Auto Offline data collection on/off support.
|
| Suspend Offline collection upon new
|
| command.
|
| Offline surface scan supported.
|
| Self-test supported.
|
| No Conveyance Self-test supported.
|
| Selective Self-test supported.
|
| SMART capabilities: (0x0003) Saves SMART data before entering
|
| power-saving mode.
|
| Supports SMART auto save timer.
|
| Error logging capability: (0x01) Error logging supported.
|
| General Purpose Logging supported.
|
| Short self-test routine
|
| recommended polling time: ( 1) minutes.
|
| Extended self-test routine
|
| recommended polling time: ( 117) minutes.
|
| SCT capabilities: (0x003d) SCT Status supported.
|
| SCT Error Recovery Control supported.
|
| SCT Feature Control supported.
|
| SCT Data Table supported.
|
|
|
| SMART Attributes Data Structure revision number: 16
|
| Vendor Specific SMART Attributes with Thresholds:
|
| ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
|
| 1 Raw_Read_Error_Rate 0x000b 058 058 016 Pre-fail Always - 55324477
|
| 2 Throughput_Performance 0x0005 069 069 054 Pre-fail Offline - 1972
|
| 3 Spin_Up_Time 0x0007 127 127 024 Pre-fail Always - 177 (Average 184)
|
| 4 Start_Stop_Count 0x0012 100 100 000 Old_age Always - 3401
|
| 5 Reallocated_Sector_Ct 0x0033 077 077 005 Pre-fail Always - 557
|
| 7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always - 0
|
| 8 Seek_Time_Performance 0x0005 115 115 020 Pre-fail Offline - 34
|
| 9 Power_On_Hours 0x0012 098 098 000 Old_age Always - 15284
|
| 10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always - 0
|
| 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 2760
|
| 192 Power-Off_Retract_Count 0x0032 098 098 000 Old_age Always - 3500
|
| 193 Load_Cycle_Count 0x0012 098 098 000 Old_age Always - 3500
|
| 194 Temperature_Celsius 0x0002 139 139 000 Old_age Always - 43 (Min/Max 15/48)
|
| 196 Reallocated_Event_Count 0x0032 075 075 000 Old_age Always - 627
|
| 197 Current_Pending_Sector 0x0022 097 097 000 Old_age Always - 224
|
| 198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0
|
| 199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always - 0
|
|
|
| SMART Error Log Version: 1
|
| No Errors Logged
|
|
|
| SMART Self-test log structure revision number 1
|
| No self-tests have been logged. [To run self-tests, use: smartctl -t]
|
|
|
| SMART Selective self-test log data structure revision number 1
|
| SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
| 1 0 0 Not_testing
|
| 2 0 0 Not_testing
|
| 3 0 0 Not_testing
|
| 4 0 0 Not_testing
|
| 5 0 0 Not_testing
|
| Selective self-test flags (0x0):
|
| After scanning selected spans, do NOT read-scan remainder of disk.
|
| If Selective self-test is pending on power-up, resume after 0 minute delay.
|
|
|
| The above only provides legacy SMART information - try 'smartctl -x' for more
|