| /*
|
| * Copyright (c) 2014-2015, The Linux Foundation. All rights reserved.
|
| *
|
| * This program is free software; you can redistribute it and/or modify
|
| * it under the terms of the GNU General Public License version 2 and
|
| * only version 2 as published by the Free Software Foundation.
|
| *
|
| * This program is distributed in the hope that it will be useful,
|
| * but WITHOUT ANY WARRANTY; without even the implied warranty of
|
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
| * GNU General Public License for more details.
|
| */
|
|
|
| &soc {
|
| };
|
|
|
| &cci {
|
|
|
| actuator0: qcom,actuator@0 {
|
| cell-index = <0>;
|
| reg = <0x0>;
|
| compatible = "qcom,actuator";
|
| qcom,cci-master = <0>;
|
| cam_vaf-supply = <&pm8916_l10>;
|
| qcom,cam-vreg-name = "cam_vaf";
|
| qcom,cam-vreg-min-voltage = <2800000>;
|
| qcom,cam-vreg-max-voltage = <2800000>;
|
| qcom,cam-vreg-op-mode = <80000>;
|
| };
|
| actuator1: qcom,actuator@1 {
|
| cell-index = <1>;
|
| reg = <0x1>;
|
| compatible = "qcom,actuator";
|
| qcom,cci-master = <0>;
|
| cam_vaf-supply = <&pm8916_l10>;
|
| qcom,cam-vreg-name = "cam_vaf";
|
| qcom,cam-vreg-min-voltage = <2800000>;
|
| qcom,cam-vreg-max-voltage = <2800000>;
|
| qcom,cam-vreg-op-mode = <80000>;
|
| };
|
| //<asus-leong_un20150327>>>>>>>>>+
|
| led_flash0: qcom,led-flash@37 {
|
| cell-index = <0>;
|
| reg = <0x37>;
|
| qcom,slave-id = <0x6E 0x00 0x0011>;
|
| compatible = "qcom,led-flash1";
|
| label = "sky81296";
|
| qcom,flash-type = <1>;
|
| qcom,enable_pinctrl;
|
| pinctrl-names = "cam_flash_default", "cam_flash_suspend";
|
| pinctrl-0 = <&cam_sensor_flash_default>;
|
| pinctrl-1 = <&cam_sensor_flash_sleep>;
|
| pinctrl-2 = <&flash_err_default>;
|
| gpios = <&msm_gpio 31 0>, // R_FLASH_DEV_EN gpio 31 F_FLASH_DEV_EN gpio 32
|
| <&msm_gpio 32 0>,
|
| <&msm_gpio 86 0>; // CAM_FLASH_FLINH gpio 86
|
| qcom,gpio-flash-en = <0>;
|
| qcom,gpio-flash_1-en = <1>;
|
| qcom,gpio-flash-now = <2>;
|
| qcom,gpio-req-tbl-num = <0 1 2>;
|
| qcom,gpio-req-tbl-flags = <0 0 0>;
|
| qcom,gpio-req-tbl-label =
|
| "FLASH_EN",
|
| "FLASH_1_EN",
|
| "FLASH_NOW";
|
| qcom,cci-master = <0>;
|
| };
|
|
|
| ois0: qcom,ois@29 {
|
| cell-index = <0>;
|
| reg = <0x29>;
|
| qcom,slave-id = <0x52 0x0000 0xb4>;
|
| compatible = "qcom,ois";
|
| label = "vl6180";
|
| qcom,cci-master = <0>;
|
| cam_vaf-supply = <&pm8916_l10>;
|
| qcom,cam-vreg-name = "cam_vaf";
|
| qcom,cam-vreg-min-voltage = <2800000>;
|
| qcom,cam-vreg-max-voltage = <2800000>;
|
| qcom,cam-vreg-op-mode = <80000>;
|
| };
|
| //<asus-leong_un20150327<<<<<<<<<+
|
| /*
|
| eeprom0: qcom,eeprom@0 {
|
| cell-index = <0>;
|
| reg = <0x20>;
|
| qcom,eeprom-name = "sonyimx135";
|
| compatible = "qcom,eeprom";
|
| qcom,slave-addr = <0x20>;
|
| qcom,cci-master = <0>;
|
| qcom,num-blocks = <16>;
|
|
|
| qcom,page0 = <1 0x3b02 2 0x10 1 5>;
|
| qcom,pageen0 = <1 0x3b00 2 0x01 1 5>;
|
| qcom,poll0 = <1 0x3b01 2 0x01 1 5>;
|
| qcom,mem0 = <8 0x3b04 2 0 1 0>;
|
|
|
| qcom,page1 = <1 0x3b02 2 0x0F 1 5>;
|
| qcom,pageen1 = <1 0x3b00 2 0x01 1 5>;
|
| qcom,poll1 = <1 0x3b01 2 0x01 1 5>;
|
| qcom,mem1 = <8 0x3b04 2 0 1 0>;
|
|
|
| qcom,page2 = <1 0x3b02 2 0x0E 1 5>;
|
| qcom,pageen2 = <1 0x3b00 2 0x01 1 5>;
|
| qcom,poll2 = <1 0x3b01 2 0x01 1 5>;
|
| qcom,mem2 = <8 0x3b04 2 0 1 0>;
|
|
|
| qcom,page3 = <1 0x3b02 2 0x0D 1 5>;
|
| qcom,pageen3 = <1 0x3b00 2 0x01 1 5>;
|
| qcom,poll3 = <1 0x3b01 2 0x01 1 5>;
|
| qcom,mem3 = <8 0x3b04 2 0 1 0>;
|
|
|
| qcom,page4 = <1 0x3b02 2 0x12 1 5>;
|
| qcom,pageen4 = <1 0x3b00 2 0x01 1 5>;
|
| qcom,poll4 = <1 0x3b01 2 0x01 1 5>;
|
| qcom,mem4 = <7 0x3b09 2 0 1 0>;
|
|
|
| qcom,page5 = <1 0x3b02 2 0x11 1 5>;
|
| qcom,pageen5 = <1 0x3b00 2 0x01 1 5>;
|
| qcom,poll5 = <1 0x3b01 2 0x01 1 5>;
|
| qcom,mem5 = <7 0x3b09 2 0 1 0>;
|
|
|
| qcom,page6 = <1 0x3b02 2 0x10 1 5>;
|
| qcom,pageen6 = <1 0x3b00 2 0x01 1 5>;
|
| qcom,poll6 = <1 0x3b01 2 0x01 1 5>;
|
| qcom,mem6 = <7 0x3b09 2 0 1 0>;
|
|
|
| qcom,page7 = <1 0x3b02 2 0x09 1 5>;
|
| qcom,pageen7 = <1 0x3b00 2 0x01 1 5>;
|
| qcom,poll7 = <1 0x3b01 2 0x01 1 5>;
|
| qcom,mem7 = <7 0x3b09 2 0 1 0>;
|
|
|
| qcom,page8 = <1 0x3b02 2 0x01 1 5>;
|
| qcom,pageen8 = <1 0x3b00 2 0x01 1 5>;
|
| qcom,poll8 = <1 0x3b01 2 0x01 1 5>;
|
| qcom,mem8 = <64 0x3b04 2 0 1 0>;
|
|
|
| qcom,page9 = <1 0x3b02 2 0x02 1 5>;
|
| qcom,pageen9 = <1 0x3b00 2 0x01 1 5>;
|
| qcom,poll9 = <1 0x3b01 2 0x01 1 5>;
|
| qcom,mem9 = <64 0x3b04 2 0 1 0>;
|
|
|
| qcom,page10 = <1 0x3b02 2 0x03 1 5>;
|
| qcom,pageen10 = <1 0x3b00 2 0x01 1 5>;
|
| qcom,poll10 = <1 0x3b01 2 0x01 1 5>;
|
| qcom,mem10 = <64 0x3b04 2 0 1 0>;
|
|
|
| qcom,page11 = <1 0x3b02 2 0x04 1 5>;
|
| qcom,pageen11 = <1 0x3b00 2 0x01 1 5>;
|
| qcom,poll11 = <1 0x3b01 2 0x01 1 5>;
|
| qcom,mem11 = <64 0x3b04 2 0 1 0>;
|
|
|
| qcom,page12 = <1 0x3b02 2 0x05 1 5>;
|
| qcom,pageen12 = <1 0x3b00 2 0x01 1 5>;
|
| qcom,poll12 = <1 0x3b01 2 0x01 1 5>;
|
| qcom,mem12 = <64 0x3b04 2 0 1 0>;
|
|
|
| qcom,page13 = <1 0x3b02 2 0x06 1 5>;
|
| qcom,pageen13 = <1 0x3b00 2 0x01 1 5>;
|
| qcom,poll13 = <1 0x3b01 2 0x01 1 5>;
|
| qcom,mem13 = <64 0x3b04 2 0 1 0>;
|
|
|
| qcom,page14 = <1 0x3b02 2 0x07 1 5>;
|
| qcom,pageen14 = <1 0x3b00 2 0x01 1 5>;
|
| qcom,poll14 = <1 0x3b01 2 0x01 1 5>;
|
| qcom,mem14 = <64 0x3b04 2 0 1 0>;
|
|
|
| qcom,page15 = <1 0x3b02 2 0x08 1 5>;
|
| qcom,pageen15 = <1 0x3b00 2 0x01 1 5>;
|
| qcom,poll15 = <1 0x3b01 2 0x01 1 5>;
|
| qcom,mem15 = <56 0x3b04 2 0 1 0>;
|
|
|
| cam_vdig-supply = <&pm8916_s4>;
|
| cam_vio-supply = <&pm8916_l17>;
|
| cam_vana-supply = <&pm8916_l6>;
|
| cam_vaf-supply = <&pm8916_l10>;
|
| qcom,cam-vreg-name = "cam_vdig", "cam_vio", "cam_vana", "cam_vaf";
|
| qcom,cam-vreg-min-voltage = <2100000 0 1800000 2800000>;
|
| qcom,cam-vreg-max-voltage = <2100000 0 1800000 2800000>;
|
| qcom,cam-vreg-op-mode = <200000 0 80000 100000>;
|
| pinctrl-names = "cam_default", "cam_suspend";
|
| pinctrl-0 = <&cam_sensor_mclk0_default &cam_sensor_rear_default>;
|
| pinctrl-1 = <&cam_sensor_mclk0_sleep &cam_sensor_rear_sleep>;
|
| qcom,gpio-no-mux = <0>;
|
| gpios = <&msm_gpio 26 0>,
|
| <&msm_gpio 35 0>,
|
| <&msm_gpio 34 0>;
|
| qcom,gpio-reset = <1>;
|
| qcom,gpio-standby = <2>;
|
| qcom,gpio-req-tbl-num = <0 1 2>;
|
| qcom,gpio-req-tbl-flags = <1 0 0>;
|
| qcom,gpio-req-tbl-label = "CAMIF_MCLK0",
|
| "CAM_RESET0",
|
| "CAM_STANDBY0";
|
| qcom,gpio-set-tbl-num = <1 1>;
|
| qcom,gpio-set-tbl-flags = <0 2>;
|
| qcom,gpio-set-tbl-delay = <1000 4000>;
|
|
|
| qcom,cam-power-seq-type = "sensor_vreg", "sensor_vreg", "sensor_vreg",
|
| "sensor_vreg", "sensor_gpio", "sensor_clk";
|
| qcom,cam-power-seq-val = "cam_vdig", "cam_vana", "cam_vio", "cam_vaf",
|
| "sensor_gpio_reset", "sensor_cam_mclk";
|
| qcom,cam-power-seq-cfg-val = <1 1 1 1 1 24000000>;
|
| qcom,cam-power-seq-delay = <1 1 1 1 30 5>;
|
| clocks = <&clock_gcc clk_mclk0_clk_src>,
|
| <&clock_gcc clk_gcc_camss_mclk0_clk>;
|
| clock-names = "cam_src_clk", "cam_clk";
|
| };
|
|
|
| eeprom1: qcom,eeprom@1 {
|
| cell-index = <1>;
|
| reg = <0x1>;
|
| qcom,eeprom-name = "dw9761b";
|
| compatible = "qcom,eeprom";
|
| qcom,slave-addr = <0xB0>;
|
| qcom,cci-master = <0>;
|
| qcom,num-blocks = <29>;
|
| qcom,page0 = <0 0x0 2 0x0 1 0>;
|
| qcom,poll0 = <0 0x0 2 0x0 1 0>;
|
| qcom,mem0 = <2332 0x0400 2 0 1 0>;
|
|
|
| qcom,page1 = <0 0x0 2 0x0 1 0>;
|
| qcom,poll1 = <0 0x0 2 0x0 1 0>;
|
| qcom,mem1 = <3 0x0F10 2 0 1 0>;
|
|
|
| // bpc: insensor bpc
|
| qcom,saddr2 = <0x5A>;
|
| qcom,page2 = <1 0x6028 2 0x4000 2 0>;
|
| qcom,poll2 = <0 0x0 2 0x0 2 0>;
|
| qcom,mem2 = <0 0x0 2 0x0 1 0>;
|
|
|
| qcom,page3 = <1 0x0136 2 0x1800 2 0>;
|
| qcom,poll3 = <0 0x0 2 0x0 2 0>;
|
| qcom,mem3 = <0 0x0 2 0x0 1 0>;
|
|
|
| qcom,page4 = <1 0x0304 2 0x0006 2 0>;
|
| qcom,poll4 = <0 0x0 2 0x0 2 0>;
|
| qcom,mem4 = <0 0x0 2 0x0 1 0>;
|
|
|
| qcom,page5 = <1 0x0306 2 0x0073 2 0>;
|
| qcom,poll5 = <0 0x0 2 0x0 2 0>;
|
| qcom,mem5 = <0 0x0 2 0x0 1 0>;
|
|
|
| qcom,page6 = <1 0x030C 2 0x0004 2 0>;
|
| qcom,poll6 = <0 0x0 2 0x0 2 0>;
|
| qcom,mem6 = <0 0x0 2 0x0 1 0>;
|
|
|
| qcom,page7 = <1 0x030E 2 0x0064 2 0>;
|
| qcom,poll7 = <0 0x0 2 0x0 2 0>;
|
| qcom,mem7 = <0 0x0 2 0x0 1 0>;
|
|
|
| qcom,page8 = <1 0x0302 2 0x0001 2 0>;
|
| qcom,poll8 = <0 0x0 2 0x0 2 0>;
|
| qcom,mem8 = <0 0x0 2 0x0 1 0>;
|
|
|
| qcom,page9 = <1 0x0300 2 0x0004 2 0>;
|
| qcom,poll9 = <0 0x0 2 0x0 2 0>;
|
| qcom,mem9 = <0 0x0 2 0x0 1 0>;
|
|
|
| qcom,page10 = <1 0x030A 2 0x0001 2 0>;
|
| qcom,poll10 = <0 0x0 2 0x0 2 0>;
|
| qcom,mem10 = <0 0x0 2 0x0 1 0>;
|
|
|
| qcom,page11 = <1 0x0308 2 0x0008 2 0>;
|
| qcom,poll11 = <0 0x0 2 0x0 2 0>;
|
| qcom,mem11 = <0 0x0 2 0x0 1 0>;
|
|
|
| qcom,page12 = <1 0x0100 2 0x0100 2 10>;
|
| qcom,poll12 = <0 0x0 2 0x0 2 0>;
|
| qcom,mem12 = <0 0x0 2 0x0 1 0>;
|
|
|
| qcom,page13 = <1 0x0A02 2 0x0D 1 0>;
|
| qcom,pageen13 = <1 0x0A00 2 0x01 1 0>;
|
| qcom,poll13 = <0 0x0 2 0x0 2 0>;
|
| qcom,mem13 = <64 0xA04 2 0x0 1 0>;
|
|
|
| qcom,page14 = <1 0x0A02 2 0x0E 1 0>;
|
| qcom,pageen14 = <1 0x0A00 2 0x01 1 0>;
|
| qcom,poll14 = <0 0x0 2 0x0 2 0>;
|
| qcom,mem14 = <64 0xA04 2 0x0 1 0>;
|
|
|
| qcom,page15 = <1 0x0A02 2 0x0F 1 0>;
|
| qcom,pageen15 = <1 0x0A00 2 0x01 1 0>;
|
| qcom,poll15 = <0 0x0 2 0x0 2 0>;
|
| qcom,mem15 = <64 0xA04 2 0x0 1 0>;
|
|
|
| qcom,page16 = <1 0x0A02 2 0x10 1 0>;
|
| qcom,pageen16 = <1 0x0A00 2 0x01 1 0>;
|
| qcom,poll16 = <0 0x0 2 0x0 2 0>;
|
| qcom,mem16 = <64 0xA04 2 0x0 1 0>;
|
|
|
| qcom,page17 = <1 0x0A02 2 0x11 1 0>;
|
| qcom,pageen17 = <1 0x0A00 2 0x01 1 0>;
|
| qcom,poll17 = <0 0x0 2 0x0 2 0>;
|
| qcom,mem17 = <64 0xA04 2 0x0 1 0>;
|
|
|
| qcom,page18 = <1 0x0A02 2 0x12 1 0>;
|
| qcom,pageen18 = <1 0x0A00 2 0x01 1 0>;
|
| qcom,poll18 = <0 0x0 2 0x0 2 0>;
|
| qcom,mem18 = <64 0xA04 2 0x0 1 0>;
|
|
|
| qcom,page19 = <1 0x0A02 2 0x13 1 0>;
|
| qcom,pageen19 = <1 0x0A00 2 0x01 1 0>;
|
| qcom,poll19 = <0 0x0 2 0x0 2 0>;
|
| qcom,mem19 = <64 0xA04 2 0x0 1 0>;
|
|
|
| qcom,page20 = <1 0x0A02 2 0x14 1 0>;
|
| qcom,pageen20 = <1 0x0A00 2 0x01 1 0>;
|
| qcom,poll20 = <0 0x0 2 0x0 2 0>;
|
| qcom,mem20 = <64 0xA04 2 0x0 1 0>;
|
|
|
| qcom,page21 = <1 0x0A02 2 0x15 1 0>;
|
| qcom,pageen21 = <1 0x0A00 2 0x01 1 0>;
|
| qcom,poll21 = <0 0x0 2 0x0 2 0>;
|
| qcom,mem21 = <64 0xA04 2 0x0 1 0>;
|
|
|
| qcom,page22 = <1 0x0A02 2 0x16 1 0>;
|
| qcom,pageen22 = <1 0x0A00 2 0x01 1 0>;
|
| qcom,poll22 = <0 0x0 2 0x0 2 0>;
|
| qcom,mem22 = <64 0xA04 2 0x0 1 0>;
|
|
|
| qcom,page23 = <1 0x0A02 2 0x17 1 0>;
|
| qcom,pageen23 = <1 0x0A00 2 0x01 1 0>;
|
| qcom,poll23 = <0 0x0 2 0x0 2 0>;
|
| qcom,mem23 = <64 0xA04 2 0x0 1 0>;
|
|
|
| qcom,page24 = <1 0x0A02 2 0x18 1 0>;
|
| qcom,pageen24 = <1 0x0A00 2 0x01 1 0>;
|
| qcom,poll24 = <0 0x0 2 0x0 2 0>;
|
| qcom,mem24 = <64 0xA04 2 0x0 1 0>;
|
|
|
| qcom,page25 = <1 0x0A02 2 0x19 1 0>;
|
| qcom,pageen25 = <1 0x0A00 2 0x01 1 0>;
|
| qcom,poll25 = <0 0x0 2 0x0 2 0>;
|
| qcom,mem25 = <64 0xA04 2 0x0 1 0>;
|
|
|
| qcom,page26 = <1 0x0A02 2 0x1A 1 0>;
|
| qcom,pageen26 = <1 0x0A00 2 0x01 1 0>;
|
| qcom,poll26 = <0 0x0 2 0x0 2 0>;
|
| qcom,mem26 = <64 0xA04 2 0x0 1 0>;
|
|
|
| qcom,page27 = <1 0x0A02 2 0x1B 1 0>;
|
| qcom,pageen27 = <1 0x0A00 2 0x01 1 0>;
|
| qcom,poll27 = <0 0x0 2 0x0 2 0>;
|
| qcom,mem27 = <64 0xA04 2 0x0 1 0>;
|
|
|
| qcom,page28 = <1 0x0A02 2 0x1C 1 0>;
|
| qcom,pageen28 = <1 0x0A00 2 0x01 1 0>;
|
| qcom,poll28 = <0 0x0 2 0x0 2 0>;
|
| qcom,mem28 = <60 0xA04 2 0x0 1 0>;
|
|
|
| cam_vdig-supply = <&pm8916_s4>;
|
| cam_vio-supply = <&pm8916_l17>;
|
| cam_vana-supply = <&pm8916_l6>;
|
| cam_vaf-supply = <&pm8916_l10>;
|
| qcom,cam-vreg-name = "cam_vdig", "cam_vio", "cam_vana", "cam_vaf";
|
| qcom,cam-vreg-min-voltage = <2100000 0 1800000 2800000>;
|
| qcom,cam-vreg-max-voltage = <2100000 0 1800000 2800000>;
|
| qcom,cam-vreg-op-mode = <200000 0 80000 100000>;
|
| pinctrl-names = "cam_default", "cam_suspend";
|
| pinctrl-0 = <&cam_sensor_mclk0_default &cam_sensor_rear_default>;
|
| pinctrl-1 = <&cam_sensor_mclk0_sleep &cam_sensor_rear_sleep>;
|
| qcom,gpio-no-mux = <0>;
|
| gpios = <&msm_gpio 26 0>,
|
| <&msm_gpio 35 0>,
|
| <&msm_gpio 34 0>;
|
| qcom,gpio-reset = <1>;
|
| qcom,gpio-standby = <2>;
|
| qcom,gpio-req-tbl-num = <0 1 2>;
|
| qcom,gpio-req-tbl-flags = <1 0 0>;
|
| qcom,gpio-req-tbl-label = "CAMIF_MCLK0",
|
| "CAM_RESET0",
|
| "CAM_STANDBY0";
|
| qcom,gpio-set-tbl-num = <1 1>;
|
| qcom,gpio-set-tbl-flags = <0 2>;
|
| qcom,gpio-set-tbl-delay = <1000 4000>;
|
|
|
| qcom,cam-power-seq-type = "sensor_vreg", "sensor_vreg", "sensor_vreg",
|
| "sensor_vreg", "sensor_gpio", "sensor_clk";
|
| qcom,cam-power-seq-val = "cam_vdig", "cam_vana", "cam_vio", "cam_vaf",
|
| "sensor_gpio_reset", "sensor_cam_mclk";
|
| qcom,cam-power-seq-cfg-val = <1 1 1 1 1 24000000>;
|
| qcom,cam-power-seq-delay = <1 1 1 1 30 5>;
|
| clocks = <&clock_gcc clk_mclk0_clk_src>,
|
| <&clock_gcc clk_gcc_camss_mclk0_clk>;
|
| clock-names = "cam_src_clk", "cam_clk";
|
| };
|
| qcom,camera@78 {
|
| compatible = "ovti,ov5645";
|
| reg = <0x78 0x0>;
|
| qcom,slave-id = <0x78 0x300a 0x5645>;
|
| qcom,csiphy-sd-index = <1>;
|
| qcom,csid-sd-index = <1>;
|
| qcom,mount-angle = <90>;
|
| qcom,sensor-name = "ov5645";
|
| cam_vdig-supply = <&pm8916_s4>;
|
| cam_vana-supply = <&pm8916_l17>;
|
| cam_vio-supply = <&pm8916_l6>;
|
| qcom,cam-vreg-name = "cam_vdig", "cam_vio", "cam_vana";
|
| qcom,cam-vreg-min-voltage = <2100000 0 2850000>;
|
| qcom,cam-vreg-max-voltage = <2100000 0 2850000>;
|
| qcom,cam-vreg-op-mode = <200000 0 80000>;
|
| pinctrl-names = "cam_default", "cam_suspend";
|
| pinctrl-0 = <&cam_sensor_mclk1_default
|
| &cam_sensor_front_default>;
|
| pinctrl-1 = <&cam_sensor_mclk1_sleep &cam_sensor_front_sleep>;
|
| gpios = <&msm_gpio 27 0>,
|
| <&msm_gpio 28 0>,
|
| <&msm_gpio 33 0>;
|
| qcom,gpio-reset = <1>;
|
| qcom,gpio-standby = <2>;
|
| qcom,gpio-req-tbl-num = <0 1 2>;
|
| qcom,gpio-req-tbl-flags = <1 0 0>;
|
| qcom,gpio-req-tbl-label = "CAMIF_MCLK",
|
| "CAM_RESET",
|
| "CAM_STANDBY";
|
| qcom,gpio-set-tbl-num = <1 1>;
|
| qcom,gpio-set-tbl-flags = <0 2>;
|
| qcom,gpio-set-tbl-delay = <1000 4000>;
|
| qcom,csi-lane-assign = <0x4320>;
|
| qcom,csi-lane-mask = <0x3>;
|
| qcom,sensor-position = <1>;
|
| qcom,sensor-mode = <0>;
|
| qcom,cci-master = <0>;
|
| clocks = <&clock_gcc clk_mclk1_clk_src>,
|
| <&clock_gcc clk_gcc_camss_mclk1_clk>;
|
| clock-names = "cam_src_clk", "cam_clk";
|
| };
|
| */
|
|
|
|
|
| qcom,camera@0 {
|
|
|
|
|
| cell-index = <0>;
|
| compatible = "qcom,camera";
|
| reg = <0x0>;
|
| qcom,csiphy-sd-index = <0>;
|
| qcom,csid-sd-index = <0>;
|
| qcom,mount-angle = <90>;
|
| qcom,actuator-src = <&actuator0>;
|
| //<asus-leong_un20150325>>>>>>>>>+
|
| qcom,led-flash-src = <&led_flash0>;
|
| //<asus-leong_un20150325<<<<<<<<<+
|
| cam_vana-supply = <&pm8916_l17>;
|
| cam_vio-supply = <&pm8916_l16>;
|
| cam_vaf-supply = <&pm8916_l10>;
|
| qcom,cam-vreg-name = "cam_vio", "cam_vaf", "cam_vana";
|
| qcom,cam-vreg-min-voltage = <1800000 2800000 2850000>;
|
| qcom,cam-vreg-max-voltage = <1800000 2800000 2850000>;
|
| qcom,cam-vreg-op-mode = <0 100000 80000>;
|
| pinctrl-names = "cam_default", "cam_suspend";
|
| pinctrl-0 = <&cam_sensor_mclk0_default &cam_sensor_rear_default>;
|
| pinctrl-1 = <&cam_sensor_mclk0_sleep &cam_sensor_rear_sleep>;
|
| gpios = <&msm_gpio 26 0>,
|
| <&msm_gpio 34 0>,
|
| <&msm_gpio 116 0>,
|
| <&msm_gpio 35 0>;
|
| qcom,gpio-vana = <1>;
|
| qcom,gpio-vdig = <2>;
|
| qcom,gpio-reset = <3>;
|
| qcom,gpio-req-tbl-num = <0 1 2 3>;
|
| qcom,gpio-req-tbl-flags = <1 0 0 0>;
|
| qcom,gpio-req-tbl-label = "CAM0_MCLK",
|
| "CAM_2V8_EN",
|
| "CAM_1V2_EN",
|
| "MCAM_PWDN";
|
| qcom,sensor-position = <0>;
|
| qcom,sensor-mode = <0>;
|
| qcom,cci-master = <0>;
|
| qcom,mclk-19200000;
|
| status = "ok";
|
| clocks = <&clock_gcc clk_mclk0_clk_src>,
|
| <&clock_gcc clk_gcc_camss_mclk0_clk>;
|
| clock-names = "cam_src_clk", "cam_clk";
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| /*
|
| cell-index = <0>;
|
| compatible = "qcom,camera";
|
| reg = <0x0>;
|
| qcom,csiphy-sd-index = <0>;
|
| qcom,csid-sd-index = <0>;
|
| qcom,mount-angle = <90>;
|
| qcom,actuator-src = <&actuator0>;
|
| //<asus-leong_un20150325>>>>>>>>>+
|
| qcom,led-flash-src = <&led_flash0>;
|
| //<asus-leong_un20150325<<<<<<<<<+
|
| // qcom,eeprom-src = <&eeprom0 &eeprom1>;
|
| cam_vdig-supply = <&pm8916_s4>;
|
| // cam_vdig-supply = <&pm8916_12>;
|
| cam_vana-supply = <&pm8916_l17>;
|
| cam_vio-supply = <&pm8916_l16>;
|
| cam_vaf-supply = <&pm8916_l10>;
|
| qcom,cam-vreg-name = "cam_vdig", "cam_vio", "cam_vana",
|
| "cam_vaf";
|
| qcom,cam-vreg-min-voltage = <1200000 1800000 2850000 2800000>;
|
| qcom,cam-vreg-max-voltage = <1200000 1800000 2850000 2800000>;
|
| qcom,cam-vreg-op-mode = <200000 0 80000 100000>;
|
| pinctrl-names = "cam_default", "cam_suspend";
|
| pinctrl-0 = <&cam_sensor_mclk0_default
|
| &cam_sensor_rear_default>;
|
| pinctrl-1 = <&cam_sensor_mclk0_sleep &cam_sensor_rear_sleep>;
|
| gpios = <&msm_gpio 26 0>,
|
| <&msm_gpio 34 0>,
|
| <&msm_gpio 116 0>,
|
| <&msm_gpio 35 0>,
|
| <&msm_gpio 51 0>,
|
| <&msm_gpio 28 0>;
|
| qcom,gpio-vana = <1>;
|
| qcom,gpio-vdig = <2>;
|
| qcom,gpio-reset = <3>;
|
| qcom,gpio-custom1 = <4>;
|
| qcom,gpio-af-pwdm = <5>;
|
| qcom,gpio-req-tbl-num = <0 1 2 3 4 5>;
|
| qcom,gpio-req-tbl-flags = <1 0 0 0 0 0>;
|
| qcom,gpio-req-tbl-label = "CAMIF_MCLK",
|
| "INT_CAM_2V8_EN",
|
| "CAM_1V2_EN",
|
| "CAM_RESET1",
|
| "MCAM_ID",
|
| "VCM_PD";
|
| qcom,sensor-position = <0>;
|
| qcom,sensor-mode = <0>;
|
| qcom,cci-master = <0>;
|
| qcom,mclk-19200000;
|
| status = "ok";
|
| clocks = <&clock_gcc clk_mclk0_clk_src>,
|
| <&clock_gcc clk_gcc_camss_mclk0_clk>;
|
| clock-names = "cam_src_clk", "cam_clk";
|
| */
|
| };
|
| //ASUS_BSP Stimber_Hsueh "Mini-porting for rear camera" ---
|
|
|
| qcom,camera@1 {
|
| cell-index = <1>;
|
| compatible = "qcom,camera";
|
| reg = <0x1>;
|
| qcom,csiphy-sd-index = <1>;
|
| qcom,csid-sd-index = <1>;
|
| qcom,mount-angle = <270>;
|
| qcom,actuator-src = <&actuator1>;
|
| qcom,led-flash-src = <&led_flash0>;
|
| cam_vdig-supply = <&pm8916_s4>;
|
| cam_vana-supply = <&pm8916_l17>;
|
| cam_vio-supply = <&pm8916_l16>;
|
| cam_vaf-supply = <&pm8916_l10>;
|
| qcom,cam-vreg-name = "cam_vdig", "cam_vio", "cam_vana",
|
| "cam_vaf";
|
| qcom,cam-vreg-min-voltage = <1200000 1800000 2850000 2800000>;
|
| qcom,cam-vreg-max-voltage = <1200000 1800000 2850000 2800000>;
|
| qcom,cam-vreg-op-mode = <200000 0 80000 100000>;
|
| pinctrl-names = "cam_default", "cam_suspend";
|
| pinctrl-0 = <&cam_sensor_mclk1_default &cam_sensor_front_default>;
|
| pinctrl-1 = <&cam_sensor_mclk1_sleep &cam_sensor_front_sleep>;
|
| gpios = <&msm_gpio 27 0>,
|
| <&msm_gpio 34 0>,
|
| <&msm_gpio 116 0>,
|
| <&msm_gpio 33 0>,
|
| <&msm_gpio 49 0>;
|
| qcom,gpio-vana = <1>;
|
| qcom,gpio-vdig = <2>;
|
| qcom,gpio-reset = <3>;
|
| qcom,gpio-af-pwdm = <4>;
|
| qcom,gpio-req-tbl-num = <0 1 2 3 4>;
|
| qcom,gpio-req-tbl-flags = <1 0 0 0 0>;
|
| qcom,gpio-req-tbl-label = "CAM1_MCLK",
|
| "CAM_2V8_EN",
|
| "CAM_1V2_EN",
|
| "SCAM_PWDN",
|
| "F_VCM_PD";
|
| //qcom,csi-lane-assign = <0x4320>;
|
| //qcom,csi-lane-mask = <0x3>;
|
| qcom,sensor-position = <1>;
|
| qcom,sensor-mode = <1>;
|
| qcom,cci-master = <0>;
|
| qcom,mclk-19200000;
|
| status = "ok";
|
| clocks = <&clock_gcc clk_mclk1_clk_src>,
|
| <&clock_gcc clk_gcc_camss_mclk1_clk>;
|
| clock-names = "cam_src_clk", "cam_clk";
|
| };
|
| };
|